Kenwood
Global Site
  Home > Products > Communications > Land Mobile Radio > TK-7100 / 8100 > Spec
TK-2180 / 3180
TK-480
TK-2170 / 3170
TK-270G
TK-2107 / 3107
TK-7180 / 8180
TK-980
TK-7160 / 8160
TK-7100 / 8100
TK-90
TKR-750 / 850

TK-7100(H) / 8100(H)
Top Features Spec Accessories Product Appearance
  TK-7100 TK-8100
GENERAL
Frequency Range 146-174 MHz 440-480 MHz
Channels / Groups 64 CH / 8 GRP
(Up to 64 channels can be allocated into 8 groups)
Channel Spacing (Wide / Narrow) 25 kHz / 12.5 kHz
PLL Channel Stepping 2.5 kHz, 5 kHz,
6.25 kHz, 7.5 kHz
5 kHz, 6.25 kHz
Operating Voltage 13.6 V, DC ±15%
Current drain
Standby
Receive
Transmit (High Power)
 
0.4 A
1.0 A
14.0 A
Operating Temperature Range -30ºC ~ +60ºC
Frequency Stability (-30ºC ~ +60ºC) ±2.5 ppm
Dimensions (W x H x D, without projections)  
160 mm x 43 mm x 137 mm
Weight (Body only, approximate) 1.18 kg
Channel Frequency Spread 28 MHz 40 MHz
RECEIVER (Measurements made per EIA/TIA-603)
Sensitivity (Wide / Narrow) 0.28μV / 0.35μV (12dB SINAD)
Selectivity (Wide / Narrow) 75 dB / 65 dB
Intermodulation Distortion (Wide / Narrow)  
70 dB / 60 dB
Spurious Response 75 dB
Audio Output (4Ω, 5% Distortion) 4.0 W
TRANSMITTER (Measurements made per EIA/TIA-603)
RF Power Output (High / Low) 50W : TK-7100(H)
25W : TK-7100
45W : TK-8100(H)
25W : TK-8100
Spurious & Harmonics (High Power) 70 dB
Modulation (Wide / Narrow) 16KØF3E / 11KØF3E
FM Noise (Wide / Narrow) 45 dB / 40 dB
Audio Distortion (Wide / Narrow) Less than 3%
Microphone Impedance 600Ω
Kenwood reserves the right to change specifications and features without prior notice.
SmarTrunk II is a trademark of SmarTrunk Systems, Inc.

Applicable MIL-STD
Standard MIL 810C
Methods/Procedures
MIL 810D
Methods/Procedures
MIL 810E
Methods/Procedures
MIL 810F
Methods/Procedures
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I Cat. 8 514.4/Procedure I Cat. 8 514.5/Procedure I Cat. 20
Shock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.4/Procedure I
 
Page to TOP
About Us   SiteMap
  Copyright 2007 Kenwood Corporation