 |
|
|
 |
|
|
|
| |
TK-7160 |
TK-8160 |
| GENERAL |
Frequency Range
E type
E3 type |
136|174 MHz
- |
440|470 MHz
400|430 MHz |
Number of Channels
Zone
Channel |
Max.128ch's Total per Radio
Max.128 per Radio
Max.128 per Zone |
| Channel Spacing |
25 kHz / 20 kHz / 12.5 kHz |
25 kHz / 20 kHz* / 12.5 kHz |
| PLL Channel Stepping |
2.5 kHz, 5 kHz, 6.25 kHz, 7.5 kHz |
5 kHz, 6.25 kHz |
| Operating Voltage |
13.6 V, DC ±15% |
Current drain
Standby
Receive
Transmit |
0.4 A
1.0 A
8.0 A |
| Operating Temperature Range |
-30ºC ~ +60ºC |
| Frequency Stability |
±2.5 ppm (-30ºC ~ +60ºC) |
| Antenna impedance |
50Ω |
Channel Frequency Spread
E type
E3 type |
38 MHz
\ |
30 MHz
30 MHz |
Dimensions (W x H x D)
Projections not included |
160 mm x 43 mm x 107 mm |
| Weight (net) |
1.00 kg |
| Applicable Standards |
EN 300 086, EN 300 113,
EN 300 219, EN 301 489 |
E-mark (95/54/EC)
E type
E3 type |
e11*72/245*95/54*3016*00
\ |
e11*72/245*95/54*3017*00
e11*72/245*95/54*3018*00 |
| RECEIVER |
Sensitivity (EIA 12dB SINAD)
Sensitivity (EN 20dB SINAD)
25kHz/20kHz*/12.5kHz |
0.28μV / 0.28μV / 0.35μV
-3dB μV / -3dB μV / -2dBμV |
Adjacent Channel Selectivity
25kHz/20kHz*/12.5kHz |
70 dB / 70 dB / 60 dB |
| Intermodulation |
65 dB |
| Spurious Response Regection |
70 dB |
| Audio Output (4Ω impedance) |
4 W with less than 5 % distortion |
| TRANSMITTER |
| RF Output Power |
5 - 25 W : TK-7160
25 - 50W : TK-7160(H) |
5 - 25W : TK-8160
25 - 45W : TK-8160(H) |
| Modulation Limiting |
±5.0 kHz at 25 kHz
±4.0 kHz at 20 kHz
±2.5 kHz at 12.5 kHz |
±5.0 kHz at 25 kHz
±4.0 kHz at 20 kHz*
±2.5 kHz at 12.5 kHz |
| Spurious Emission |
-36 dBm< 1 GHz , -30 dBm> 1 GHz |
| FM Noise (EIA) |
45 dB / 40 dB |
| Modulation Distortion |
3 % / 5 % |
| Microphone Impedance |
600Ω |
|
*TK-8160 E3 type: channel spacing 12.5 kHz / 25 kHz
Measurements made per EN Standards.
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
FleetSync® is a registered trademark of Kenwood Corporation.
Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.
All other trademarks are property of their respective owners.
|
Applicable MIL-STD
|
| Standard |
MIL 810C
Methods/Procedures |
MIL 810D
Methods/Procedures |
MIL 810E
Methods/Procedures |
MIL 810F
Methods/Procedures |
| Low Pressure |
500.1/Procedure I |
500.2/Procedure I, II |
500.3/Procedure I, II |
500.4/Procedure I, II |
| High Temperature |
501.1/Procedure I, II |
501.2/Procedure I, II |
501.3/Procedure I, II |
501.4/Procedure I, II |
| Low Temperature |
502.1/Procedure I |
502.2/Procedure I, II |
502.3/Procedure I, II |
502.4/Procedure I, II |
| Temperature Shock |
503.1/Procedure I |
503.2/Procedure I |
503.3/Procedure I |
503.4/Procedure I, II |
| Solar Radiation |
505.1/Procedure I |
505.2/Procedure I |
505.3/Procedure I |
505.4/Procedure I |
| Rain* |
506.1/Procedure II |
506.2/Procedure II |
506.3/Procedure II |
506.4/Procedure III |
| Humidity |
507.1/Procedure I, II |
507.2/Procedure II, III |
507.3/Procedure II, III |
507.4 |
| Salt Fog |
509.1/Procedure I |
509.2/Procedure I |
509.3/Procedure I |
509.4 |
| Dust |
510.1/Procedure I |
510.2/Procedure I |
510.3/Procedure I |
510.4/Procedure I, III |
| Vibration |
514.2/Procedure VIII, X |
514.3/Procedure I |
514.4/Procedure I |
514.5/Procedure I |
| Shock |
516.2/Procedure I, II,III,V |
516.3/Procedure I, IV,V |
516.4/Procedure I, IV,V |
516.5/Procedure I, IV,V |
|
| * Required condition for Drip-Rain: KCT cable and/or SP cable are not connected; KMC-35/36 Microphone is connected. |
| |
 |
|
|
